LJ serial arched surface pipe saw can cut branch pipe with specific radian while fabricating the reducing tee welding fittings in PE, PP, or other thermoplastic material, specified.
Radius saw is used to cut branch pipes used in production of reducing tees and manifolds;
Single workstation, including purpose-built bandsaw and radius-adjustable outlet jig to hold branch pipe 63 to 500mm;
Electrically operated;
Manual feeding speed;
CE approved by www.sgs.com.
Malfunction analyzes:
① The pipeline cannot be clamped.
② Poor adjustment of pressure relay.
③ Leakage of clamping cylinder.
Solutions:
① Adjust the clamping pressure;
② Adjust the pressure relay;
③ Replace the oil ring
Malfunction analyzes
① System pressure is too high or low;
② Throttle valve is adjusted improperly;
③ Controllable cheek valve is adjusted improperly.
Solutions
① Adjust the system pressure;
② Adjust the throttle valve;
③ Adjust the single direction valve.
Malfunction analyzes
① The overflow valve core is blocked
② Oil filter is blocked.
③ Overflow valve core is blocked
Solutions
① Disconnect & wash or change the overflow valve
② Wash the oil filter.
③ Disassemble and clean the overflow valve core.
